MP-5210 BARBER COLMAN 120V VALVE ACTUATOR2-15VDC S/R

Manufacturer: Barber Colman

- 120V - 50/60Hz - 10 Watts - 0.135 Amps - 2 to 15 Vdc Input Signal - Nominal 3 Vdc Operating Span Features • Linear motion output shaft controlled by a variable dc voltage input signal. • Spring return. • Nominal 3 Vdc operating span. • Fixed start point and non-positive positioning. • 10,000 Ω or greater input impedance. • 24 Vac, 120 Vac, and 240 Vac models • Optional adjustable SPDT auxiliary switch. • Available in damper models or base models that require damper or valve linkage. • Die cast lower housing and painted steel upper housing. • Hydraulic actuator with oil-immersed motor, transducer, and pump. • Internal feedback circuitry provides non-positive positioning control in relation to the controller signal. The MP-5200 Series actuators are for the electronic proportional control of dampers, valves, or program switches which require the return to normal position upon power interruption. This series is compatible with 2 to 15 Vdc input signals from TAC System 8000TM, TAC NETWORK 8000, and TAC DMS DDC controllers MP-5210

SKU: BARBER COLMAN:MP-5210

Product Availability: Out of stock

$462.28

This product must be purchased in increments of 1

Qty:

i h

- 120V
- 50/60Hz
- 10 Watts
- 0.135 Amps
- 2 to 15 Vdc Input Signal
- Nominal 3 Vdc Operating Span

Features
• Linear motion output shaft controlled by a variable dc voltage input signal.
• Spring return.
• Nominal 3 Vdc operating span.
• Fixed start point and non-positive positioning.
• 10,000 Ω or greater input impedance.
• 24 Vac, 120 Vac, and 240 Vac models
• Optional adjustable SPDT auxiliary switch.
• Available in damper models or base models that require damper or valve linkage.
• Die cast lower housing and painted steel upper housing.
• Hydraulic actuator with oil-immersed motor, transducer, and pump.
• Internal feedback circuitry provides non-positive positioning control in relation to the controller signal.

The MP-5200 Series actuators are for the electronic proportional control of dampers, valves, or program switches which require the return to normal position upon power interruption. This series is compatible with 2 to 15 Vdc input signals from TAC System 8000TM, TAC NETWORK 8000, and TAC DMS DDC controllers

MP-5210

Products specifications

Manufacturer	Barber Colman