The Lever Valve offers added protection in certain situations. It is sometimes used at the Tank and held open by a spring loaded flexible wire in which fusible links are set. If the temperature at the link reaches standard temperature (165F), the links will pull apart and the valve will immediately close, stopping the flow of oil. (All acessores shown below are included).
Accessories furnished with each each Lever Valve: take-up spring, coild of braided wire, two fusible links (set at 165 degrees F) and two Pulleys
B100L British Only Valve
Firomatic Ref #91261000BVO
Handpump Assembly
The Handpump is a combination pressure and vacuum handpump for air or liquids. Used to clean lines, free stuck valves, prime pumps, build up test pressure or vacuum in lines and tanks. The two-way pump assembly has a solid brass barrel and is fitted with two absolutely tight check valves to attach directly onto lines, use with extension tubing, or pipe permanently into a system. It is also furnished without the valves.
The handpump hose kit contains flexible reinforced hoses plus all the fittings necessary to add chemicals to boilers, clean lines, free stuck valves, prime pumps and to build up test pressure or vacuum in lines and tanks. Fittings are designed to be hand-tightened and easy to use.
Firomatic Ref #91304001
The Lever Valve offers added protection in certain situations. It is sometimes used at the Tank and held open by a spring loaded flexible wire in which fusible links are set. If the temperature at the link reaches standard temperature (165F), the links will pull apart and the valve will immediately close, stopping the flow of oil. (All acessores shown below are included).
Accessories furnished with each each Lever Valve: take-up spring, coild of braided wire, two fusible links (set at 165 degrees F) and two Pulleys
B100L British Only Valve
Firomatic Ref #91261000BVO
Handpump Assembly
The Handpump is a combination pressure and vacuum handpump for air or liquids. Used to clean lines, free stuck valves, prime pumps, build up test pressure or vacuum in lines and tanks. The two-way pump assembly has a solid brass barrel and is fitted with two absolutely tight check valves to attach directly onto lines, use with extension tubing, or pipe permanently into a system. It is also furnished without the valves.
The handpump hose kit contains flexible reinforced hoses plus all the fittings necessary to add chemicals to boilers, clean lines, free stuck valves, prime pumps and to build up test pressure or vacuum in lines and tanks. Fittings are designed to be hand-tightened and easy to use.
Firomatic Ref #91304001
