AQUASMART BOILER TEMP CONTROL GAS 24 VAC

Electrical Ratings - Input Voltage: 120 Vac – 60 Hz - Input Current: 0.1 A + B1 + C1 + ZC - MAX Input Current: 20A (Reduce to 15A if optional power switch is used) - 24 Vac thermostat anticipator current: 0.1 Amp - Burner Current Rating (B1): 1.25 A at 24 Vac; 30 VA (total load) - Circulator Current Rating (C1): 7.4 A at 120 Vac FLA; 44.4 A inrush LRA - Zone Control Current Rating (ZC): 7.4 A at 120 Vac FLA; 44.4 A inrush LRA Temperature Ranges and Differentials - High Limit Setting Range: 100 to 220°F (37 to 104°C) - High Limit Differential Range: 5 to 45°F (2 to 25°C) - Low Limit Setting Range: 100 to 205°F (37 to 96°C) - Low Limit Differential Range: 10 to 45°F (5 to 25°C) Factory Range Stops available—consult factory Environmental Ratings - Storage Temperature: -40 to +150 °F (-40 to +65 °C) - Operating Temperature: -4 to +150 °F (-20 to +65 °C) - Relative Humidity: 5 to 85% RH, non-condensing and non-crystallizing Features and Benefits - Beckett HeatManager dynamic temperature reset - Energy saving through circulator-off delay - Expanded wiring box for easier installation - Priority override for domestic hot water - Freeze resistance can help prevent frozen pipes - Temperature only and LWCO sensors available - Cycle history diagnostic information - Backlit LCD screen with programming touch pad - Oil and gas offerings available - Cold-Start compatible - Easy to install Wireless Outdoor Temperature Reset (optional) The Beckett AquaSmart 7610B control is an advanced microprocessor-based universal boiler control with a 24 VAC burner circuit for gas fired equipment. For use on residential and light commercial boiler systems, the 7610B is designed to save energy without sacrificing homeowner comfort. All models include the option of Beckett HeatManage dynamic temperature reset that, when selected, provides up to 20% fuel consumption savings. The control includes a backlit LCD digital display with touch pad to easily program temperature limits, differentials, and other advanced options. The AquaSmart also has memory storage of system history for help with diagnostic troubleshooting. The control is compatible with an AquaSmart 7600TS Temperature Sensor or AquaSmart 7600P Temperature Sensor with Water Level Detection for low-water cutoff (LWCO). The 7610 AquaSmart Advanced Boiler Control is designed for use on residential and light commercial hot water boilers. It is a direct replacement for existing 7600 AquaSmart Boiler Controls. The 7610 offers significant improvements from the existing 7600 controls: Larger enclosure with almost twice the wiring space Mounting changes to assure straighter alignment on well mounted applications Improved grounding for LWCO applications LWCO status displayed on the Status Screen Economizing verification on Status Screen when HeatManager™ is enabled The 7610 is backward compatible with existing 7600P/TS sensors and can be used with existing 7600TW polymer wells or the new 7622TW brass wells REPLACES 7600B0001U