BR100 Beckett AFG Oil and Renewable Fuels Burner (Chassis Only, 0.50–3.00 GPH)

⚠️ Important Note:
DOES NOT INCLUDE MOUNTING FLANGE — DOES NOT INCLUDE BLAST TUBE AND ASSEMBLY
AFG Chassis Only (Replaces B2007 & B2008)

📝 Product Description
The Beckett BR100 AFG Oil and Renewable Fuels Burner (Model BR100, Chassis Only) is engineered to meet today’s heating demands with advanced fuel compatibility, high efficiency, and proven reliability. Designed for boilers, furnaces, and water heaters, this burner supports traditional No.1 and No.2 heating oils, diesel, renewable diesel, and biodiesel blends up to B100.

Built with UL-listed components, including the CleanCut fuel pump, PSC motor, GeniSys 7565 control, and electronic igniter, the BR100 (Chassis Only) provides consistent ignition, cleaner combustion, and easy diagnostics. Perfect for both upgrades and replacements, this burner ensures long-lasting performance while supporting carbon reduction initiatives.

✅ Key Features

• ✅ Wide Firing Range: 0.50 to 3.00 GPH

• ✅ BTU/hr Input: 56,000–420,000

• ✅ Fuel Versatility: Compatible with heating oil, diesel, renewable diesel, biodiesel blends up to B100

• ✅ Advanced Control: GeniSys 7565 with diagnostics, history tracking, smart thermostat compatibility

• ✅ CleanCut Pump Technology: Delivers precise fuel flow, reduced smoke, and quieter operation

• ✅ Reliable Ignition: Electronic oil igniter with 20kV output for consistent starts

• ✅ Proven Durability: Tested for high-temperature operation (-40°F to 150°F)

• ✅ Chassis-Only Upgrade: Simple replacement for aging Beckett burners

• ✅ Eco-Ready: UL listed for 100% biodiesel and renewable diesel use

📊 Specifications Table

⚠️ Common Symptoms (When to Replace)

• Burner motor fails to start or overheats frequently

• Inconsistent ignition or delayed start-ups

• Excess smoke or poor combustion efficiency

• Burner unable to run on biodiesel or renewable fuels

• Excessive noise from the blower wheel or pump

• Burner chassis older than 10 years (efficiency loss likely)

❓ Frequently Asked Questions (FAQ)

Q1: Does this burner come with a blast tube and mounting flange?
➡️ No, this is a chassis-only kit. The blast tube and flange must be purchased separately.

Q2: What fuels are supported?
➡️ This burner supports No.1 and No.2 heating oils, diesel fuel, renewable diesel, and biodiesel blends up to 100% (B100).

Q3: Is this burner compatible with older boilers and furnaces?
➡️ Yes. It’s designed as a replacement upgrade for Beckett AFG burners and commonly used in residential and light commercial systems.

Q4: What makes the CleanCut pump better?
➡️ It provides cleaner shutoff, reduced smoke, improved efficiency, and quieter performance compared to traditional pumps.

Q5: Can I install this burner myself?
➡️ Professional installation is recommended to ensure correct setup, safety, and compliance with local codes.

🛒 Shopping Tips

• 🔧 Check Your System: Ensure your existing boiler, furnace, or water heater is compatible with the BR100 (Chassis Only) replacement.

• 🛑 Blast Tube & Flange: This kit does not include the mounting flange or blast tube. Purchase separately if needed.

• 🔌 Power Requirements: Confirm your system provides 120V, 60Hz to match the burner and motor specifications.

• 🌱 Fuel Type: Verify the fuel type in your system matches supported fuels (heating oil #1/#2, diesel, renewable diesel, or biodiesel blends up to B100).

• 🧰 Professional Installation Recommended: To ensure safety, correct fit, and warranty compliance, have a licensed technician perform installation.

• 🔍 Maintenance Check: Consider upgrading if your current burner is 10+ years old for improved efficiency and emissions.