Model No PSH-1 Primary/Secondary Header,
CONNECTION SIZE INCHES (MM) 1 (25.4, MAX FLOW GPM (M3/H)=
11 (2.5), A INCHES (mm)= 24-3/8 (619), B INCHES (mm)= 8-7/8 (225), C DRAIN CONNECTION SIZE INCHES (mm) NPT= 1/2 (12.7)
With Insulation working Pressure 150 PSI, Operating Temperature Threaded: 32*-210*F, Operating Temperature Flanged" 32*-220*F.
Without Insualtion; Working pressure 150 PSI, Operating Temperature Threaded and Flanged: 32*-230*F.
The B & G Low-loss header Model PSH is a combination air separator and manifold that creates independent primary and secondary circuits. The B & G Model PSH is equipped with a purge valve allowing the user to remove any debris deposited on the bottom of the vessel and an air vent releasing trapped air in the system. The insulation, which is provided as a standard, prevents water vapors entering from the outside and eliminates the formation of condensate on the PSH body.
Installation: The B& G PSH saves time and money by simplifying the piping associated with traditional primary/secondary systems.
Materials of Construction: Body=Steel, Air Vent= Brass, Drain Valve= Brass, Insulation-Threaded= PEX, Insulation-Flanged= Polyurethane FoamClick here for more information
