Coolair 210 Smart Seal External A/C Leak Stop Putty Up To 5mm Leaks
AC SmartSeal External is a leak stop suitable for any material. It effectively seals all types of leaks up to 5 mm. Specifically designed to be inert to all kinds of lubricants and refrigerant gases, EXTERNAL does not react to temperature changes.
The pressure resistance depends on the size of the loss:
580 psi – 5 mm leak diameter
725 psi- 2 mm leak diameter
825 psi-1 mm leak diameter
SMARTSEAL External can be easily mixed by using two fingers. Once applied, the leak is closed. It is ideal for emergency sealing and does not disperse any residue into the system and, if necessary, it can be easily removed and once dried, the product can be sanded and refinished.
SMART SEAL External has been developed to be compatible with POE, PAG, PAO, minerals lubricants and alkylbenzene, and also with the following refrigerants: CFC, HFC, HCFC, CO, It has also been tested for new generation gases such as R1234yf and R1234ze
Instructions- Find the leak by using the usual detection methods. Once the leak is identified, turn off the system, and clean the application area .Cut with a cutter or a knife a quantity of SMART SEAL External which is enough to create a ring around the entire diameter of the pipe in the area of the leak. Wear protective gloves and mix the two components for a while. The color must be uniform and you should perceive a slight sensation of heat. Put he mixture on the leak, let it adhere well to the whole circumference. Wait 24 hours for drying. Once the product is dried, let the system run normally again.
If you need to remove the product, spray grease/seal remover on it, wait a moment, grab the ring with pliers or spanners with a little pressure, that does not deform the pipe, and rotate in one direction.