Coolair 322 AC Smart Seal 0.20 Ounce Syringe Of Quick Shot Refrigeration Leak Seal
Super concentrate solution SAFE for the User, 100% green product non-fLammable. Non-toxic, GUARANTEED permanent seal
Dose: 0.20 Ounces Treats Systems Up To 6 Tons (21KW, 72,000BTU/H)
AC SmartSeal Quick Shot is our newest technology that does not require pumping down of the system. This product is ideal for direct pinhole repairs
and the prevention of refrigerant leaks.
Ideal for Preventing Refrigerant Leaks or Direct Repairs
Permanently Seal Leaks of Refrigerant Gas in AC and Refrigeration systems
Compatible with all Refrigerants
Polymer Free
Approved by OEM’s
Not Activated by Oxygen or Moisture
Non-clogging of all Components
Instructions:
1- Turn the A/C system on. If the unit is a heat pump, be sure it is set on cooling mode. Connect the cartridge to Easy Inject and fully inject sealant in it.
2- Connect Easy Inject to the low-pressure service port of A/C system. Connect a charging hose to a refrigerant cylinder.
3- Briefly open the cylinder valve to purge air out of the charging hose. Quickly tighten the charging hose fitting to Easy Inject. Inject refrigerant through Easy Inject and push sealant into the A/C system.
4- Run A/C system for 30 minutes to allow the product to fully circulate.
Use Instead Of Leak Freeze Pro 45315, Nu-Calgon Easy Inject 4050-08, Nu-Calgon Easy Inject With UV Dye 4050-11, Clip Light 985 Flex Inject Kit
