You have no items in your shopping cart.
CRANKCASE HEATER
TORQUE 2.26-2.82 NEWTON-METERS [20-25 INCH-POUNDS]
EXCESS CLAMP BRACKET MAY BE TRIMMED. (SHARP EDGES MUST NOT CONTACT WIRES)
ONLY CONNECT CRANKCASE HEATER TO RATED VOLTAGE
CRANKCASE HEATER MUST SIT FLAT ON SHELL O.D. AND NOT ON WELDMENTS.
CRANKCASE HEATER TO BE ENERGIZED FOR A MINIMUM OF FOUR (4) HOURS PRIOR TO COMPRESSOR START UP TO PREVENT OIL SLUGGING
