Search

46038404 4"SK 4" ALUMINIZED STARKAP VENT CAP

Manufacturer: Field Controls
4"SK 4" ALUMINIZED STARKAP VENT CAP
SKU: FIELD CONTROLS:46038404
Product Availability: Out of stock
$79.97
This product must be purchased in increments of 1
i h

4"SK 4" ALUMINIZED STARKAP VENT CAP

The Star-Kap® is the only vent cap that is not required to be two feet higher than any structure within ten feet when used on detached or lean-to buildings that house heating equipment outside of the living space.

The unique design of the aluminized Star-Kap Vent Cap prevents downdrafts and assists the vent in drawing off and exhausting waste gases regardless of wind direction. The Star-Kap can be used to vent gas or oil-fired boilers, furnaces, water heaters and more.

Although vent stacks are designed to remove dangerous gases and smoke created by burning gas and oil, this process can be adversely affected by the direction of the wind. A sudden gust could blow noxious waste gases down the vent stack and into the building. The Star-Kap prevents a potentially dangerous situation.

Prevent Flue Gas Spillage

The Star-Kap, when used in conjunction with a double-acting Draft Control and Thermal Safety Switch, creates a system that prevents flue gas spillage and carbon monoxide formation. Ask about AGA testing reports for more information.

When to use a Star-Kap

  • To prevent downdrafts.
  • To keep birds and debris out of the vent stack.
  • To keep rain out of the vent stack.
  • In conjunction with Barometric Draft Control and Thermal Safety Switch to prevent carbon monoxide formation in draft hooded gas appliances with a poorly drafting vent system.
  • When venting gas or oil appliances


  • 4"SK 4" ALUMINIZED STARKAP VENT CAP

    The Star-Kap® is the only vent cap that is not required to be two feet higher than any structure within ten feet when used on detached or lean-to buildings that house heating equipment outside of the living space.

    The unique design of the aluminized Star-Kap Vent Cap prevents downdrafts and assists the vent in drawing off and exhausting waste gases regardless of wind direction. The Star-Kap can be used to vent gas or oil-fired boilers, furnaces, water heaters and more.

    Although vent stacks are designed to remove dangerous gases and smoke created by burning gas and oil, this process can be adversely affected by the direction of the wind. A sudden gust could blow noxious waste gases down the vent stack and into the building. The Star-Kap prevents a potentially dangerous situation.

    Prevent Flue Gas Spillage

    The Star-Kap, when used in conjunction with a double-acting Draft Control and Thermal Safety Switch, creates a system that prevents flue gas spillage and carbon monoxide formation. Ask about AGA testing reports for more information.

    When to use a Star-Kap

  • To prevent downdrafts.
  • To keep birds and debris out of the vent stack.
  • To keep rain out of the vent stack.
  • In conjunction with Barometric Draft Control and Thermal Safety Switch to prevent carbon monoxide formation in draft hooded gas appliances with a poorly drafting vent system.
  • When venting gas or oil appliances


  • Products specifications
    Manufacturer Field Controls