MEC120 FIREYE MICROM PLUG-IN BOARD 120V CONTROL MODULE CHASSIS

FIREYE MEC120 MicroM Standard Plug-In Board 120V Control Module Chassis Only 120V MICRO M CHASIS - 120V - 50/60Hz - Max Ambient Temp 140 F - Ignition 250 VA - Alarm 50 VA Pilot Duty - Valve 125 VA Pilot Duty Features • Microprocessor based timings • SMART diagnostic LED’s • Option plug-in display (ED510) • MODBUS communication protocol • Expanded amplifier selection - UV - Flame Rod - Infrared - UV Self-Check - Cad Cell • 0.8 or 3 second FFRT • Uniform 0-10 vdc test jack voltage • Remote reset • History retained - Last six lockouts - Burner on time - Burner cycles - Installed hours - Programmer configuration This Is The Chassis Only Does Not Include Amplifier Or Program Card The Fireye MicroM Flame Safeguard controls are compact, modular burner management systems designed to provide automatic ignition and continuous flame monitoring for commercial sized heating and process burners firing any type of fuel. The MicroM is designed to be backward compatible with existing M-Series controls. The MicroM, through the use of micro-controller technology, incorporates “smart” diagnostic LED’s. Exact Same As Power Flame 361000, PowerFlame 361000 Fireye MEC120 FlameSafeguard Control, Fireye MEC120 Flame Safeguard Control The Fireye MicroM Series Flame Safeguard Control is a compact, microprocessor based, modular burner management system designed to provide automatic ignition and continuous flame monitoring for commercial and process equipment that use gas and/or light oil fuels. Interchangeable programmer and amplifier modules allow for complete versatility in selection and control function, timing and flame scanning means. Functions such as relight, two stage capability, interrupted pilot, non-recycle air flow, air flow circuit proven open at start, purge timing and pilot cutoff are determined by the appropriate module