-
Home
/
-
THREMOSTATIC RADIATOR CONTROL WITH COMBINED REMOTE TEMPERATU
THREMOSTATIC RADIATOR CONTROL WITH COMBINED REMOTE TEMPERATU
- Temperature Range 48 F to 79 F
- Used With V100, V2000
- Capillary Length 6 1/2 ft
- Collar Diameter (in.)1 3/16 in
Replaces
- American Steam - 02-300-00.
- Taco - 5206.
- Danfoss RA2000 - 013G8262.
- Ammark - 76.
- TM Macon - TML B42000.
- NT Macon - NTL B45000. in combination with V2000
Features
- Continually monitor and adjust room temperature for consistent comfort and relief from under-heating and overheating.
- Valve seat disc, which is made of resilient material (EPDM), ensures tight shutoff on steam or hot water systems.
- Nickel-plated brass casted body with working parts in cartridge insert for ease of service.
- Controls include sensor, setpoint dial and valve actuator; components may be integral or connected by capillary tubes.
- Require no electrical connections.
- All working parts are replaceable using service tool (MT100C1016) while valve remains in service, in-line, under pressure.
- Valves normally open without control mounted.
- Valves may also be used with MV100 Electric Zone Valve Actuator.
Allow automatic temperature control in two-pipe steam or hot water systems for free standing radiators, convectors, and other heating units with standard capacity requirements. Provide comfort and energy savings at affordable prices.
A control with combined remote setpoint and sensor mounted on wall. Connected by a capillary tube to an actuator, which is mounted on the valve body.
SKU:
HONEYWELL HOME:T100B1035
This product must be purchased in increments of 1
- Temperature Range 48 F to 79 F
- Used With V100, V2000
- Capillary Length 6 1/2 ft
- Collar Diameter (in.)1 3/16 in
Replaces
- American Steam - 02-300-00.
- Taco - 5206.
- Danfoss RA2000 - 013G8262.
- Ammark - 76.
- TM Macon - TML B42000.
- NT Macon - NTL B45000. in combination with V2000
Features
- Continually monitor and adjust room temperature for consistent comfort and relief from under-heating and overheating.
- Valve seat disc, which is made of resilient material (EPDM), ensures tight shutoff on steam or hot water systems.
- Nickel-plated brass casted body with working parts in cartridge insert for ease of service.
- Controls include sensor, setpoint dial and valve actuator; components may be integral or connected by capillary tubes.
- Require no electrical connections.
- All working parts are replaceable using service tool (MT100C1016) while valve remains in service, in-line, under pressure.
- Valves normally open without control mounted.
- Valves may also be used with MV100 Electric Zone Valve Actuator.
Allow automatic temperature control in two-pipe steam or hot water systems for free standing radiators, convectors, and other heating units with standard capacity requirements. Provide comfort and energy savings at affordable prices.
A control with combined remote setpoint and sensor mounted on wall. Connected by a capillary tube to an actuator, which is mounted on the valve body.