HONEYWELL 24V MOD IV MOTOR SPRING RETURN 60LB ADJ

Manufacturer: Honeywell

24V Motor Shaft: Dual ended Shaft Torque Rating (lb-in.): 60 lb-in 50/60Hz 20VA Mounting: foot-mounted Temperature Range: -40 to 150F Nominal Timing (sec): 30 -60 sec Fail Safe Mode: Spring Return Features • Models rated for 60 lb.-in. torque. • Fixed torque throughout the entire voltage range. • Integral spring return returns motor to normal position when power is interrupted. • Integral junction box provides NEMA 3 weather protection. • Motor and circuitry operate from 24 Vac. Models available with factory installed transformer, or a field added internal transformer. • Quick-connect terminals are standard—screw terminal adapter is available. • Motors have field adjustable stroke (90° to 160°). • Die-cast aluminum housing. • Motors are designed for either normally open or normally closed valves and dampers. • All models have auxiliary switch cams. • Motors can operate valve linkages from the power end or auxiliary end shafts for normally closed or normally open valve applications. • All models have dual shafts (slotted and tapped on both ends). • Nominal timing standard of 30 seconds (90° stroke), and 60 seconds (160° stroke). Other timings available. The Series 41 and Series 81 Modutrol IV Motors are 2-position (line- and low- voltage control, respectively) spring-return motors. They are used to operate dampers or valves in applications where it is necessary or desirable to have the controlled element return to the starting position in the event of power failure or interruption.

SKU: HONEYWELL:M8185D1006

Product Availability: 1

$1,563.89

This product must be purchased in increments of 1

Qty:

i h

24V
Motor Shaft: Dual ended Shaft
Torque Rating (lb-in.): 60 lb-in
50/60Hz
20VA
Mounting: foot-mounted
Temperature Range: -40 to 150F
Nominal Timing (sec): 30 -60 sec
Fail Safe Mode: Spring Return

Features
• Models rated for 60 lb.-in. torque.
• Fixed torque throughout the entire voltage range.
• Integral spring return returns motor to normal position when power
is interrupted.
• Integral junction box provides NEMA 3 weather protection.
• Motor and circuitry operate from 24 Vac. Models available with
factory installed transformer, or a field added internal transformer.
• Quick-connect terminals are standard—screw terminal adapter is
available.
• Motors have field adjustable stroke (90° to 160°).
• Die-cast aluminum housing.
• Motors are designed for either normally open or normally closed
valves and dampers.
• All models have auxiliary switch cams.
• Motors can operate valve linkages from the power end or auxiliary
end shafts for normally closed or normally open valve applications.
• All models have dual shafts (slotted and tapped on both ends).
• Nominal timing standard of 30 seconds (90° stroke), and 60 seconds (160° stroke). Other timings available.

The Series 41 and Series 81 Modutrol IV Motors are
2-position (line- and low- voltage control, respectively)
spring-return motors. They are used to operate dampers or
valves in applications where it is necessary or desirable to
have the controlled element return to the starting position in
the event of power failure or interruption.

Products specifications

Manufacturer	Honeywell