W7080A1016 LOAD ANALYZER, 3 HEAT/ 3 COOL

Manufacturer: Honeywell

- Packaged RTU; Furnace; Split System - 50/60Hz - 3 Heat / 3 Cool - Contact Ratings: NO 240 VA inrush @ 24 Vac, 60 VA running @ 24 Vac; NC 75 VA inrush @ 24 Vac, 30 VA running @ 24 Vac - Voltage: 24 Vdc - Operating Temperature Range : -40 F to +150 F Features : - Controls 3 stages of on/off heating, modulated heating, modulated economizer, 3 stages of on/off cooling and modulated cooling. - Responds to highest heating and cooling demand signal from up to 12 T7080 Zone Thermostat/Transmitters. - Analyzer is short-circuit protected source of 24 Vdc power for zone thermostat/transmitter, sensor and W7081A Limit Controller Package. - Switches all stages off when power is interrupted; switches stages on when power is restored. - Compressor turn-on time delays must be incorporated for each compressor. - No adjustment or calibrations required. - Night setback and cooling shutdown for individual or all zones by addition of time-clock. - Mounts with 4 No. 8 Screws (not provided) through holes in base. Controls heating, cooling and space demand oriented economizer operation in the Honeywell Electronic Dual Set point Multizone control system.

SKU: HONEYWELL:W7080A1016

Product Availability: 1

$2,947.87

This product must be purchased in increments of 1

Qty:

i h

- Packaged RTU; Furnace; Split System
- 50/60Hz
- 3 Heat / 3 Cool
- Contact Ratings: NO 240 VA inrush @ 24 Vac, 60 VA running @ 24 Vac; NC 75 VA inrush @ 24 Vac, 30 VA running @ 24 Vac
- Voltage: 24 Vdc
- Operating Temperature Range : -40 F to +150 F

Features :
- Controls 3 stages of on/off heating, modulated heating, modulated economizer, 3 stages of on/off cooling and modulated cooling.
- Responds to highest heating and cooling demand signal from up to 12 T7080 Zone Thermostat/Transmitters.
- Analyzer is short-circuit protected source of 24 Vdc power for zone thermostat/transmitter, sensor and W7081A Limit Controller Package.
- Switches all stages off when power is interrupted; switches stages on when power is restored.
- Compressor turn-on time delays must be incorporated for each compressor.
- No adjustment or calibrations required.
- Night setback and cooling shutdown for individual or all zones by addition of time-clock.
- Mounts with 4 No. 8 Screws (not provided) through holes in base.

Controls heating, cooling and space demand oriented economizer operation in the Honeywell Electronic Dual Set point Multizone control system.

Products specifications

Manufacturer	Honeywell