Monarch ASP65 0.65 GPH Stainless Steel Siphon Nozzle With Brass Stem
Note: Capacities are based on rating conditions of 4 inch lift height and 4 PSIG air pressure using No. 2 Fuel Oil (34‐36 SSU Viscosity at 100° F). Capacity and spray characteristics will vary with changing air pressures (or flow) and lift heights.
Materials:
Tip: Stainless Steel
Disc: Stainless Steel
Locknut: Brass
O-Ring: BUNA N
The ASP Aspirator / Siphon Nozzle is an air operated nozzle which produces an extremely fine, fog like atomization. The Nozzle requires no pump for oil pressure since the air pressure creates a suction in the oil line which draws the oil into the nozzle.
Features:
Produces a solid cone spray pattern with extremely fine droplet size
Low air pressures and CFM required for operation
Internal nozzle passages are large and the nozzle produces very low flow rates without risk of clogging. No filter is required.
Turndown ratio in the range of 3.5:1 over a pressure range of 2 – 10 PSI can be achieved.
Replaces Hago SN609-7, 030L2156 And Delavan 30609-7
