S89C1087 HOT SURFACE IGNITION MODULE. 6 SECOND TRIAL FOR IGNITION.
S89C1087
Direct Hot Surface Pilot
Provide operating control and system shutdown on loss of main burner flame in direct ignition central heat furnaces and heating appliances with hot surface igniter.
- S89C,G,J are for systems with a combination igniter- sensor.
- S89C lock out after one try for ignition. S89G,H provide three tries for ignition before lockout, with 30 sec. min. purge before second and third tries.
- Compatible with Norton 201 and 271 or equivalent hot surface igniters.
- Available with leadwires for line voltage connections.
- Modules can be used on either natural or LP gas; they provide 100 percent shutoff of gas on lockout.
- Modules have relay contacts for use with any direct ignition gas control with max. 2.0 A, 24 Vat rating.
- Modules use rectification principle for flame sensing. -40 F to +175 F (-40 C to +79 C) temperature rating.
- Ignition Trials To Lockout: 1
- Lockout Timing 6 seconds
- Ignition Trial Time 6 seconds
- Flame Sense Single Rod
- Flame Failure Response Time: 0.8 sec. @ 5.0 micro amp
- Maximum Valve Load @ 24 Vac (Amps): 2A
