DIRECT IGNITION GAS VALVE. STANDARD OPENING. 1/2 X 1/2 REG S

- Single Stage - Includes Natural to LP Conversion Kit; 1/2" x 3/8" Reducer Bushing; 3/4" Straight Flange - Mounting 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically. - 60Hz - Electrical Connections 1/4 in. quick-connect male terminals - 24V - Operating Temperature Range 0 F to 175 F - Straight-through - Pressure Ratings (psi) 1/2 PSI - Pressure Ratings (kPa) 3.5 kPa - Inlet/Outlet Size (in.) 1/2 in. x 1/2 in. - Pilot Gas Outlet None - Pressure Tapping 1/8 in. NPT with plug - Type of Fuel Natural - Capacity (kBtuh) At 1 in. wc p.d.-- 150,000 BTUh: 20,000 BTUh minimum: 200,000 BTUh maximum Natural Gas - Pressure Regulator Setpoint (in. wc) 3.5 in. wc - Pressure Regulator Setpoint (kPa) 0.87 kPa - Ignition Type Direct Ignition Features - Controls include manual valve, two automatic operators, and pressure regulator. - Provide two automatic valves. - Solenoid operated first automatic valve opens on thermostat call for heat; closes when call for heat ends. - Diaphragm operated second automatic valve opens under control of the regulator; closes if gas or power supply is interrupted. - Meet codes requiring dual safety shutoff. - Natural to LP and LP to Natural conversion kits available for standard and slow opening gas valves. - All adjustments, wiring connections and pilot outlet are accessible from top of control. ON-OFF lighting sequence. Combination gas controls for use with hot surface/direct spark systems in 24 Vac, gas-fired appliances with capacities from 30 to 415 cfh.