DIRECT IGNITION GAS VALVE. SLOW OPENING. 1/2 X 1/2 REG SETTI

VR8215T1502 DIRECT IGNITION GAS VALVE. SLOW OPENING. 1/2 X 1/2 REG - Application: Single Stage - Includes Natural to LP Conversion Kit - Frequency 50/60 Hz - Voltage 24 Vac - Operating Temperature Range (F) -40 F to +175 F - Operating Temperature Range (C) -40 C to +79 C - Body Pattern Straight-through - Opening Characteristics Slow Opening - Pressure Ratings (psi) 1/2 psi - Pressure Ratings (kPa) 3.5 kPa - Inlet/Outlet Size (in.) 1/2 in. x 1/2 in - Pilot Gas Outlet None - Pressure Tapping 1/8 in. NPT with plug - Type of Fuel Natural (LP with included conversion kit) - Capacity (kBtuh) At 1 in. wc p.d.-- 150,000 BTUh: 15,000 BTUh minimum: 200,000 BTUh maximum Natural Gas - Pressure Regulator Setpoint (in. wc) 3.5 in. wc - Pressure Regulator Setpoint (kPa) 0.87 kPa - Ignition Type Direct Ignition - Mounts in any direction Features - Controls include manual valve, two automatic operators, and pressure regulator. - Provide two automatic valves that function independently, allowing one to act as a failsafe for the other. - Solenoid operated first automatic valve opens on thermostat call for heat; closes when call for heat ends. - Diaphragm operated second automatic valve opens under control of the regulator; closes if gas or power supply is interrupted. - Meet codes requiring dual safety shutoff. - Natural to LP and LP to Natural conversion kits available for standard and slow opening gas valves. - ON-OFF lighting sequence. - All adjustments, wiring connections and pilot outlet are accessible from top of control. Combination gas controls for use with hot surface/direct spark systems in 24 Vac, gas-fired appliances with capacities from 30 to 415 cfh. The VR8215 valve can be mounted in any orientation and the reduced installation turning radius makes it much easier to install.