SQUARE D CLOSED TANK FLOAT SWITCH 2 NPT

Float switch, Pumptrol, closed tank, NEMA 1, screw in bushing, 2 NC DPST DB contacts Product specific application Liquid level control Product destination For closed tank Device mounting Screw-in bushing Cable entry number 3 knock-outs for 1/2" conduit conforming to UL 508 Contacts type and composition 2 NC, snap action, DPST-DB, Form YY Controlled fluid Fresh water at specific gravity of 0.85 in or higher -18…104 °C Sea water at specific gravity of 0.85 in or higher -18…104 °C Hydraulic oil at specific gravity of 0.85 in or higher -18…104 °C Corrosive fluid at specific gravity of 0.85 in or higher -18…104 °C Motor power kW 1.5 KW (2 hp) at 115 V AC, 1 phase 2.2 KW (3 hp) at 115 V AC, 3 phases 2.2 KW (3 hp) at 230 V AC, 1 phase 3.7 KW (5 hp) at 230 V AC, 3 phases 0.75 KW (1 hp) at 460 V AC, 3 phases 0.75 KW (1 hp) at 475 V AC, 3 phases 0.18 KW (0.25 hp) at 32 V DC 0.37 KW (0.5 hp) at 115 V DC 0.37 kW (0.5 hp) at 230 V DC Electrical connection Screw-clamp terminals, clamping capacity: 10 AWG Contact operation Contacts close on liquid rise Float movement 6...11.5 in adjustable Float position Left Float rod angle 90° (offset) Short-circuit protection 20 A cartridge fuse, type gG Local signalling With external pointer Materials in contact with fluid Stainlesss steel 304 Cast iron Stainless steel 316 Yellow brass Nitrile (Buna-N) or equivalent rubber Enclosure material Polypropylene or equivalent Operating position Vertical position only Electrical durability 100 cycles, operating rate <60 cyc/mn Mechanical durability 300 cycles Terminal block type 4 terminals Maximum operating rate 60 cyc/mn [Ui] rated insulation voltage 575 V conforming to UL 508 Net weight 2.13 kg Terminals description ISO n°1 Line-load-load-line