Suntec J4NBA10008M Waste Oil Boost Pump 18 GPH 20-40 PSI
Specifications:
Inlet port (2 ports possible) 1/4 NPTF
Return port 1/4 NPTF
Nozzle outlet 1/8 NPTF
Pressure gauge port Use other inlet port
Bleeder valve port 1/8 NPSF
External pressure regulator needed No
Cut-off Yes, hydraulic only
Strainer 8 sq in open area
Shaft diameter 7/16 in
Hydraulic Data
Nozzle pressure range 20-40 psi
Factory pressure setting 40 psi
***See Note*** Rated nozzle flow 26 GPH @ 40 psi, 1725 rpm (# 2 fuel oil), 58 GPH @ 40 psi, 3450 rpm (# 2 fuel oil).
Oil temperature 50 - 115 F
Inlet/return pressure 10 psi max
Operating vacuum Single pipe : 6" Hg max. to prevent air separation from oil Motor Speed 1725 rpm or 3450 rpm
***Note***Flow Rates Based On # 2 Fuel Oil. Heavy Oil # 4 And Lighter As Well As Waste Oil Will Have Varying Flow Rates Depending On Viscosity
Replaces J3NBN-A132B, J3NBNA132B
Specifications:
J - SINGLE STAGE
4 - .340
N - 8 SQ. IN OPEN AREA
B - R.H. Rot. L.H. Noz.
A - 20-40 PSI 1.4-2.8 BARS
100 - FLANGE MOUNTING STYLE
G - Glasgow KY Model
J4NBA1000G Is The Exact Replacement For Clean Burn 32020, CleanBurn 32020, Firelake 56934, Fire Lake 56934, Shenandoah 56934
Used On CleanBurn 43187 Oil Transfer Pump Set Using 32022 1/6HP Motor (O610, CB-33002A, 33002, XEL2014, 316P717)
REPLACES: J4NB-A1000G
