12-730 TFE-TITE PTFE THREAD COMPOUND 1/4 PT.

12-730 TFE-TITE PTFE THREAD COMPOUND 1/4 PT. 4 oz 118 Mil - For Use On All Threaded Applications - Works with Water, Gas, Steam and more - Bright White - Non-Drying - Non-Conductive - Lead Free - Smooth - Withstands temperatures -200 to 500 F - Tested to 10,000 PSI - Multi-Purpose, Homogeneous - Non-Hardening - Non-Flammable DIRECTIONS Stir contents before use. Thoroughly clean surface of dirt, grease and oil. Apply to male threads with brush. When used on gaskets, coat both sides. Permits using gaskets several times. On high temperature applications, apply to threads at ambient temperature TFE-TITE is an FBC approved* thread sealant containing PTFE (polytetrafluoroethylene) and contains no VOCs, no PFOA and no lead, and never did. It withstands temperatures from -200ºF. to +500ºF. and pressures to 10,000 psi. Meets Fed. Spec. TT-S-1732. It is non-staining, non-toxic, non-conductive, non-corrosive, non-flammable, non-drying & non-hardening and is bright white with a wide variety of uses. Use on threaded and flanged joints in lines carrying high pressure steam, oil, gasoline, most other solvents, various gases, and refrigerants. It is also effective for acids, alkalis, water, and fuels. TFE-TITE is an effective sealant for alcohols (ethanol, methanol, amyl alcohol, glycerine), aldehydes (formaldehyde), castor oil, sulfonated oils (turkey red oil), turpenes (turpentine), salts and salt water (sodium acetate, sodium bisulfate, sodium chloride, sodium nitrate, sodium sulfate, sodium sulfite, ammonium chloride, copper chloride), refrigerants (Freon 11, 12 & 22), gases (propane, butane, natural, illuminating). NOT FOR USE ON OXYGEN LINES