🔥 111046 BELL & GOSSETT POWER PACK 1/2HP 208-230/460V 3 PHASE 1725 RPM 🔥

Product Overview

The Bell & Gossett 111046 Power Pack is a high-quality, 1/2 HP, 3-phase motor designed for Series 60 and Series PD pumps. Built for reliability and long life, this motor includes a modern built-in thermal overload protector that shuts the motor off if it overheats. Perfect for indoor pump applications in commercial and industrial environments.

⚠️ Important Notes:

• Indoor Use Only 🏠 – Designed for climate-controlled environments. Exposure to outdoor elements may cause damage and void warranty.

• UL Listed for safe operation.

• Compatible with multiple Bell & Gossett, Armstrong, Sid Harvey, and other pump models.

✅ Key Features

• 1/2 HP, 3-Phase motor

• 1725 RPM

• Built-in thermal overload protection

• UL Listed

• Indoor Use Only 🏠

• Direct replacement for Bell & Gossett, Armstrong, Sid Harvey, and other brands

• Quiet, durable cast aluminum housing

• Compatible with Series 60 and Series PD pump lines

⚙️ Technical Specifications & Components

⚠️ Common Symptoms of Motor Issues

• Motor fails to start or runs intermittently

• Excessive noise or vibration during operation

• Tripping of thermal overload protector

• Overheating or unusual odor

• Reduced pump performance or flow

❓ Frequently Asked Questions (FAQ)

Q: What pumps is this motor compatible with?

A: Compatible with Bell & Gossett Series 60, Series PD pumps, and models like 105093, 105094, 105096, 172310, 172482, 172517, 172524, 172541.

Q: Can this motor be used outdoors?
A: No. Indoor use only 🏠 – designed for climate-controlled environments.

Q: What should I do if the motor trips its overload protector?
A: Allow the motor to cool, check for blockages, ensure correct voltage, and restart. Persistent trips may indicate a mechanical issue or overloading.

Q: Is this motor a direct replacement for older models?
A: Yes, it replaces Bell & Gossett M80037, M80070, PWH-931-6Z-1296, MAGOOG-5106B, 903581, 169229, Armstrong 811757-020, Sid Harvey A28-28R, and PHD82040-Z-14.

 Q: What are the mounting and frame specifications?
The motor features a 56CZ frame size with a 5-7/8 inch bolt circle diameter, ensuring proper fit with Series 60 and PD pumps.

👷 Q: Is professional installation required?
Absolutely. A licensed technician should handle installation and testing to ensure safety and performance. Improper setup can cause damage or hazards.

⚡ Q: What type of electrical service is needed?
This is a 3-phase motor rated for 208–230/460V, 1725 RPM. ❌ Do not use on single-phase circuits.

🌡️ Q: Does this motor have thermal protection?
Yes! A built-in thermal overload protector automatically shuts off the motor if it overheats, safeguarding your equipment. 🔥

🔥 Q: What is the maximum operating temperature?
Designed for commercial and industrial environments, the motor operates safely up to 104°F (40°C) ambient.

🔍 Q: How do I verify compatibility with my pump?
Check your pump model number, voltage, phase, frame size, and bolt circle diameter. These must match the 111046 specifications for safe and reliable operation.

🔄 Q: Can this motor handle continuous or intermittent operation?
Yes! It is suitable for standard pump cycling and continuous duty applications typical in hydronic and industrial systems.

🛒 Shopping Tips

• Verify pump series and model to match motor compatibility

• Check voltage and phase requirements (208–230/460V, 3-phase)

• Confirm indoor installation location

• Inspect motor mounting dimensions (Frame Size 56CZ, Bolt Circle 5-7/8 in)